توضیحات
قیمت دی وی ار رایسک مدل RHR-HR405
قیمت دی وی ار رایسک مدل RHR-HR405
مشخصات فنی:
این دوربین مداربسته دارای 16 کانال جهت نمایش تصاویر میباشد
دارای رزولوشن ضبط 5 مگاپیکسل
این دستگاه دی وی ار میباشد و با دوربین های HD-SDI سازگاری دارد.
ظرفیت هارد دیسک تا 6 ترابایت را دارا میباشد.
دارای خروجی تصویر HDMI، VGA
دارای 4 کانال RCA
سازگار با تکنولوژی AHD/CVI/TVI/IPS/ANALOG
شرکت علم و صنعت
شرکت علم و صنعت وارد کننده برند های داهوا ، هایک ویژن ، هایلوک ، تی وی تی و همچنین صاحب برند نایک ویژن میباشد.
این شرکت تمامی محصولات ارائه شده را توسط گارانتی های اصلی ارائه میدهد.
این شرکت در بردارنده خدمات پس از فروش برای تمامی محصولات ارائه شده میباشد.
شرکت علم و صنعت همچنین در راستای تجهیزات شبکه و سوییچ های PoE صاحب برند انکاتک با ارائه گارانتی و خدمات پس از فروش میباشد.
برای دریافت اطلاعات بیشتر از قیمت ها و مشاوره میتوانید از طریق لینک زیر اقدام نمایید . با کمی صبر و بردباری مشاوران ما با شما تماس خواهند گرفت.
برای مشاهده لیست قیمت همکار کلیک فرمایید
برای مشاهده محصولات رایسک کلیک فرمایید
لنز ها در دوربین مداربسته
هر لنز باید تصویر واضحی از صحنه ایجاد کند تا دوربین به فیلم تبدیل شود.
اتصالات لنز دوربین مداربسته
در ابتدا ، چگونه می توانید هر لنز را در هر دوربینی قرار دهید؟ دستگاه های نصب ‘C’ و ‘CS’ همه دارای پیچ هستند. بعضی از لنز های بزرگتر یا قدیمی از نوع C-mount هستند بنابراین در بدنه دوربین C و CS-mount قرار می گیرند.
اکثر لنز های کوچک اخیر از نوع CS-mount هستند ، بنابراین در بدنه دوربین های CS خوب هستند اما در صورت استفاده در دوربین های نصب شده C هرگز فوکوس نخواهند داشت.
تنظیم اولیه لنز
ساده ترین لنز دوربین مداربسته یک تکه شیشه برای تمرکز نور از جهان خارج بر روی سنسور تصویربرداری دوربین است.
تنها مکانیسم سازگار این لنز ، حلقه فوکوس ، بخشی از بدنه است که آن را می چرخانید تا زمانی که تصویر شما تا آنجا که ممکن است شفاف شود.
ارتقا به لنز با “ایریس” قابل تنظیم دستی تنها یک مزیت در هنگام تنظیم است ، بنابراین هر دو به بهترین وجه مناسب صحنه هایی هستند که روشنایی ثابت است. در یک درجه محدود ، یک شاتر الکترونیکی که به طور خودکار تغییر می کند در دوربین ممکن است روشنایی را تغییر دهد. با این وجود ، در صحنه هایی که به میزان قابل توجهی متفاوت است ، چنین ویژگی های “ایریس الکترونیکی” بهتر است با لنز های “خودکار ایریس” جایگزین شوند.
لنز با ایریس اتوماتیک
لنز های ایریس اتوماتیک توسط دوربین کنترل می شوند تا اطمینان حاصل کنند که نور کافی به تراشه تصویربرداری منتقل می شود.
در هنگام راه اندازی دوربین مداربسته ، دوربین کنترل سطح خودکار (ALC) نیاز به تغییر دارد تا به روشنایی مطلوب برسد. کوچکترین لنز ها، خود ایریس الکترونیکی کمی دارند.
لنز های DD
لنز های “درایو مستقیم” (DD) دارای یک کابل داخلی هستند که به طور معمول دارای یک پلاگین اتصال مربع 4 پین استفاده می شود که به دوربین متصل می شود. تنظیم سطح فیلم با چرخاندن شیشه چرخشی روی بدنه دوربین یا استفاده از منو های نرم افزار داخلی آن انجام می شود.
CCTV Camera Lenses: A CCTV lens is a camera’s window on the world.
CCTV Camera Lenses: The old advice that “a chain is as strong as its weakest link” is definitely applicable to your CCTV. That’s why you must pay attention to every point in your system. People fail to recognise how poor choices let them down. It isn’t difficult to make great choices.
Every lens should make a clear image of the scene for the camera to turn into video. Each lens must be a strong link in your CCTV chain to make sure it can ‘pull its weight’.
CCTV lens fittings
At first, how can you fit any lens to any camera? ‘C’ and ‘CS’ mount devices all have the same screw thread. Some larger or older lenses are C-mount so will fit on both C and CS-mount camera bodies.
Most recent small lenses are CS-mount so are fine on CS camera bodies but will never achieve focus if used on a C-mount camera.
Basic lens set-up
The simplest CCTV lens is a piece of glass to focus the light from the outside world onto the camera’s imaging sensor.
This lens’ only adaptable mechanism is its focus-ring, part of the barrel body, which you turn until your image is as clear as possible. Incidentally, use the sharpest test monitor you can. For example, black & white tubed monitors can be much sharper than color LCDs.
Upgrading to a lens with a manually adaptable ‘iris’ is only a benefit during set-up, so both are best suited to scenes where lighting is constant. To a limited degree, an automatically modifying electronic shutter in the camera might accommodate changing brightness. Nevertheless, in scenes where it varies considerably, such ‘electronic iris’ features are better replaced by an ‘auto-iris’ lens.
Auto-iris lens
Automatic iris lenses are controlled by the camera to make sure that the right amount of light gets through to the imaging chip.
During CCTV set-up this lens/camera automatic level control (ALC) needs tweaking so as to reach the desired brightness. The smallest auto-iris lenses have few electronics inside because the driving amplifier is in the camera.
These ‘direct drive’ (DD) lenses have a built-in cable normally carrying a widely-used square 4-pin connector plug which connects to the camera. The video level adjustment is done by twiddling a rotary ‘pot’ on the camera’s body or using its internal software menus.
More sophisticated auto-iris (AI) lenses include their own amplifier which brings two pots. One is for adapting video level. The other is called ‘peak/average’ and when turned fully to ‘peak’ it considers the brightest part of the scene when controlling the iris. When turned completely to ‘average’ it considers the whole scene’s brightness when controlling the iris.
This latter case is most common in normal use, but the peak function can be vital where brightest areas must retain details, even at the expense of shadow details, especially under night time lighting.
Generally, the heavier auto-iris lenses contained servo motors to drive the iris mechanism, especially inside large zoom lenses. Small direct drive lenses use lightweight ‘galvometric’ electromagnetic actuators for the iris, as do some AI lenses now.
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.