توضیحات
قیمت دوربین مداربسته کورتک HAC-HDW1200EM
قیمت دوربین مداربسته کورتک HAC-HDW1200EM
همکار گرامی جهت اطلاع ازلیست قیمت همکار کلیک فرمایید.
با سلام و عرض ادب خدمت شما عزیزان گرامی.
شرکت فنی و مهندسی علم و صنعت
سالیان سال همواره به عنوان بزرگترین وارد کننده
و پخش کننده دوربین های مدار بسته با برند های نایک ویژن Nikvision ,
هوبانتی Hubanti ,هایک ویژنHikvision ,داهوا Dahua و سوئیچ و تجهیزات شبکه
با برند NKTECH مرتبط با سیستم های حفاظتی و امنیت، در سطح کشور مطرح بوده است.
مارک های معتبر جهانی نیز دیگر محصولات عرضه شونده توسط این شرکت را تشکیل می دهند.
اطلاعات فنی:
- نوع لنز این دوربین مداربسته: ثابت است
- فاصله کانونی لنز به شرح: 3.6 میلیمتر میباشد
- این دوربین مداربسته دارای قابلیت دید در شب تا فاصله 50 متر میباشد
- ورودی برق این دوربین: 12 ولت از نوع DC است
- توان مصرفی به صورت: 3.2 وات ارائه میشود
- ویژگی های این دوربین مداربسته : مجهز به DWDR / مجهز به استاندارد IP67
- ابعاد : 106*93.7 میلیمتر اندازه گیری شده است
- وزن : 0.43 کیلوگرم محاسبه شده است
- قطر سنسور این دوربین مداربسته: 1/2.7 اینچ میباشد
- رزولوشن تصویر : 1920*1080 پیکسل (2 مگاپیکسل) را ارائه میدهد
- نوع تکنولوژی به کار رفته در این دوربین مداربسته : HDCVI است
- این دوربین مداربسته از نوع دام است
- نوع سنسور این دوربین مداربسته: CMOS است
نحوه خاتمه کابل کاکاکس سیامی از رول
پلاگین DC و جک DC
کابل Siamese Coax به کاربر نیاز دارد تا انتهای آن را با اتصالات BNC برای فیلم و Power Terminals برای برق خاموش کند.
در اینجا لیستی از موارد مورد نیاز برای خاتمه کابل کواکس وجود دارد:
Coax Wire Stripper – برای از بین بردن سیم وصل شده از کابل ویدئو
BNC Twist Connector – برای خاتمه رسانای ویدیویی
Male Power Terminal – برای خاموش کردن سیم برق 2 اتصال به یک فیش DC برای اتصال به دوربین امنیتی 12 ولت DC
ترمینال برق زن – فقط درصورتی که به آداپتور برق متصل شوید که دارای پلاگین DC برای اتصال دوربین است
کابل سیامی RG59U با ترمینال تغذیه مردانه و رابط پیچ BNC
نحوه قرار دادن انتهای BNC روی کابل کواکس
تصویر بالا دو رابط ضروری و نمای اشعه ایکس از داخل کابل کواکس سیامی را نشان می دهد.
این نمودار جهت و قطب صحیح سیمها را هنگام اتصال آنها به پیچ BNC و ترمینال برق Male به تصویر می کشد.
نحوه نوک زدن سیم برق
قسمت برق کابل کشی سیامی دارای دو سیم 18 وات است که قرمز (مثبت) و سیاه (خنثی یا منفی) هستند.
بسیار مهم است که ترمینال های برق را با سیم صحیح که به شکاف صحیح در ترمینال های برق قرار دارند وصل کنید ،
همانطور که در تصویر بالا در این بخش نشان داده شده است. حفظ قطبیت صحیح بسیار مهم است.
کابل شبکه Cat5e یا Cat6
چه نوع دوربین هایی از کابل کشی شبکه یا اترنت استفاده می کنند؟
کابل کشی شبکه در درجه اول برای دوربین های IP استفاده می شود.
دوربین های IP PoE برای تأمین برق و داده از طریق همان کابل به کابل کشی اترنت نیاز دارند.
استفاده از تجهیزات PoE مانند سوئیچ PoE و PoE NVR نیاز به استفاده یا تأمین برق فردی دوربین ها را ساده می کند.
در صورت نیاز ، می توان با استفاده از آداپتور برق 12 ولت DC ،
برق خارجی را به دوربین IP تأمین کرد و سیگنال داده شبکه را می توان از طریق کابل شبکه به یک سوئیچ یا NVR منتقل کرد.
لطفاً توجه داشته باشید ، دوربین های IP PoE به گونه ای طراحی شده اند
که هر بار فقط یک منبع تغذیه را مصرف می کنند ، اگر یک دوربین PoE از قبل از طریق PoE تغذیه می شود ، به برق خارجی وصل نکنید.
آیا می توان از کابل شبکه با دوربین های BNC استفاده کرد؟
منحنی در اینجا این است که از کابل CAT5e یا CAT6 می توان برای ارسال سیگنال های ویدئویی برای دوربین های BNC با استفاده از Video Baluns به عنوان آداپتور در این بین استفاده کرد.
وقتی با یک جفت بالون استفاده می شود ، می توان کابل شبکه را به جای کابل کواکسیال RG59U نصب کرد.
برای استفاده از ویدئو بالون ، کابل شبکه نباید نوک خورده باشد ،
نیاز است که با برداشتن لایه بیرونی سیمها در هر انتها ، سیم های سیم جدا شوند.
نحوه استفاده از Balun فقط با ویدئو با کابل کشی اترنت
تصویر زیر نمونه ای از استفاده از اترنت با بالون فقط ویدئو را نشان می دهد. برای ایجاد یک کابل ویدیویی balun به موارد زیر نیاز دارید:
ویدیوی HD بالون
ترمینال برق مرد
ترمینال برق زن
نحوه اتصال ویدئو balun و ترمینال برق به سیمهای Cat5
How to terminate siamese coax cable from a roll
DC plug and DC jack
Siamese Coax cable requires the user to terminate the ends with BNC connectors for video and Power Terminals for power. Here is a list of items needed to terminate coax cable:
Coax Wire Stripper – to strip the wire jacked from the video cable
BNC Twist Connector – to terminate the video conductor
Male Power Terminal – to terminate the 2 lead power wire in to a DC plug to connect to a 12V DC security camera
Female Power Terminal – only needed if you are connecting to a power adaptor that has a DC plug to connect a camera
RG59U Siamese cable with male power terminal and BNC twist connector
How to put BNC ends on coax cable
The above picture shows the two necessary connectors and an ‘x-ray’ view of the inside of the siamese coax cable. The diagram depicts the correct orientation and polarity of the wires as they connect to the BNC twist and Male Power Terminal.
How to connect Siamese wire from a roll to a power box
To learn how to correctly connect the black and red wires from your security camera cabling, please watch the video below that demonstrates steps to secure the power leads directly into a security camera power box. While the video shows a male power pigtail being installed, it can be skipped and the ends of the siamese wire can be directly fastened down in the power box.
How to tip the power wire
The power portion of Siamese cabling has two 18awg wires that are red (positive) and black (neutral or negative). It is extremely important to attach the power terminals with the correct wire going into the correct slot on the power terminals as pictured in the illustration above in this section. Maintaining correct polarity is extremely important.
Cat5e or Cat6 Network Cable
What type of cameras use Network or Ethernet cabling?
Network cabling is primarily used for IP cameras. PoE IP cameras require ethernet cabling to supply power and data over the same cable. Using PoE enabled equipment like a PoE switch and PoE NVR simplifies the need to run or supply individual power to cameras.
If needed, external power can be supplied to an IP camera using a 12V DC power adaptor, and the network data signal can be carried over the network cable to a switch or NVR.
Please note, IP PoE cameras are designed to only take one power source at a time, do not plug a PoE camera into external power if it is already being powered over PoE.
Can network cable be used with BNC cameras?
The curveball here is that CAT5e or CAT6 cable can be used to send video signals for BNC cameras by using Video Baluns as adaptors in between. When used with a pair of baluns, network cable can be installed instead of RG59U coaxial cable. To use a video balun the network cable must not be tipped, requires the leads of the wire to be exposed by stripping the outer layer of the wires at each end.
How to use a Video-only Balun with Ethernet Cabling
The image below shows an example of using ethernet with a video-only balun. You need the following to create a video balun cable run:
HD video balun
Male Power Terminal
Female Power Terminal
how to connect video balun and power terminal to cat5 wire leads
How to use a Video and Power Balun with Ethernet Cabling
The image below shows an example of using network cable with a video and power balun. You will need a video power balun that can be found on our website here. In this method the network cable is crimped with RJ45 connectors and is simply plugged in to the RJ45 jacks on the video power balun. The video signal and power are transmitted over a single network cable, similar to how a siamese cable works.
دیدگاهها
هیچ دیدگاهی برای این محصول نوشته نشده است.